[Techtalk] need to specify the UART address

[Rajiv Saxena]

Well,I am not using any distribution as such.I am
compiling the bare kernel and I want to include this
information so that when I download and run the kernel
on the eval board,any accesses to the serial port map
to this address.

Rajiv

--- Andrew Wendt <awendt at putergeek.com> wrote:
> If you want to change what Linux thinks the base
> address of one of your 
> serial ports is, you can use the setserial command,
> like this:
> 
> setserial /dev/ttyS3 port 0x2E8 irq 3
> 
> The "uart" and "autoconfig" parameters might be
> interesting to you also.
> 
> As for what file you modify... Depends on your Linux
> distribution. Mine is 
> called /sbin/init.d/serial.
> 
> TTFN
> Andy
> 
> _______________________________________________
> Techtalk mailing list
> Techtalk at linuxchix.simegen.com
>
http://linuxchix.simegen.com/mailman/listinfo/techtalk


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/