[techtalk] 6.1 install, the undead

[RSSri at aol.com]

Is your CD ROM jumper set to master or slave?  If the jumper is set to 
master, change the jumper settings to be slave (your manual should give you 
information as to how to set the jumper settings).  
I had the same problem and the LUG (Linux Users Group at Univ. of Maryland, 
Baltimore County) helped with this and I was able to install Linux perfectly 
fine.

~Sri

************
techtalk at linuxchix.org   http://www.linuxchix.org