[techtalk] Would like advice on building system

[Cassidy]

On Wed, 20 Oct 1999, you wrote:
> I've been very happy with two motherboards I've purchased recently. At 
> home we run 2 AMD K6-2 350s on FIC 503+ motherboards. This motherboard is 
> *very* nice for AMD chips, and it's Y2K compliant. I'm also running the 
> same chip on a Tyan board at work - I can't remember the exact model. But 
> both motherboards ran around $79-$89 when we purchased them (all within 
> the last 6-8 months). 

I agree I have three of these boards, two of them have a K6-2 and one uses a
P133. They have an AGP slot and run at 100hz. What more could you need?
*giggles*



> A good place to look for part-built systems is www.lynncomputer.com (or a 
> variation thereof). There are a couple of other places you can build 
> barebones systems - if you have parts at home you can reuse, this is the 
> least expensive way to go, and you can get a good system for around $800.
> 
> Mur!
> 
> Amanda Owens
> Duke University Medical Center
> Department of Radiation Oncology
> 
> ************
> techtalk at linuxchix.org   http://www.linuxchix.org

************
techtalk at linuxchix.org   http://www.linuxchix.org