[Techtalk] Qlogic FC card - EMC storage - 2.6 Kernel. Which Qlogic driver version???

[Gina Lanik]

Hi Mukund,

On Mon, Jan 16, 2006 at 10:56:32PM -0800, Mukund Ingle (inglem) wrote:
> I am using RH with 2.6 Kernel with Qlogic driver version
> 8.00.00b21-k which is attached to EMC storage (I believe it is through
> Clarion switch.)
>  
> I get following output; and FC disk-drive is not recognized.
> Which version of Qlogic driver I should be using with 2.6 Kernel and
> is certified with EMC storage. Is there a place to find out which
> version I should be using. Please look at bottom for msg:
> "(Id:Lun)  * - indicates lun is not registered with the OS"

In my opinion the best place for finding out things like that is the EMC²
Powerlink site (https://powerlink.emc.com/) - you can get yourself an
account there and then use the so-called e-Lab Navigator (Menu Support ->
Interoperability -> e-Lab Navigator). The more details of your config you
fill in, the better.

There are quite a few possiblities why you wouldn't be able to properly
"see" the devices on the Linux host, and I heartily recomment the
documentation on the Powerlink site.

Good luck!

Gina
-- 
Gina Lanik                      :: LinuxChix member
SysAdmin & DBA                  :: http://www.linuxchix.org/
http://www.geekgrrl.priv.at/    :: LUGA member
http://nilasae.livejournal.com/ :: http://www.luga.at/