[techtalk] IO and IRQ Question for Samsung NE2000 NIC

[Conor Daly]

On Mon, Oct 30, 2000 at 01:19:50AM -0800 or so it is rumoured hereabouts, 
Adrian Glover thought:
>  I am configuring an old 486 to use Linux, and I am using a Samsung
> SC-1020TX ISA Network Card. It is NE-2000 compatible, but cannot be
> configured by auto-probe. I was wondering if anyone could help me to
> determine the io and irq settings for this card, either by some utility,
> or if you happen to know what those settings are.
> 

The usual method for non pnp cards is to get a DOS utility to configure
the card.  You'll need to find a suitable utility on the Samsung website,
write it off to a floppy, boot from a DOS floppy and start configuring...

Alternatively, you could try some typical NIC settings like 
IRQ 10 I/O 0x300

-- 
Conor Daly <conor.daly at oceanfree.net>

Domestic Sysadmin :-)