[techtalk] Modem

[Ji Lee]

Ah, thanks, =) I didn't know there was a command called 'setserial'.
I'll try again and see if it works. Since it's not my own box,
I don't have immediate access to the computer, but I'll try 
'setserial' command comming weekend.

--
        O
     O  _  O
   '\  [_]  /`
   | \_____/ | 
   `___   ___'
       | |
       `-'
g@ Y O D L E E .com


> -----Original Message-----
> From: Rik Hemsley [mailto:rik at kde.org]
> Sent: Saturday, February 12, 2000 2:22 PM
> To: techtalk at linuxchix.org
> Subject: Re: [techtalk] Modem
> 
> 
> #if Ji Lee
> > [...]
> > Any more thoughts and possible things I could try before I 
> go ahead and
> > buy a new modem? I tried to use minicom, but modem wasn't 
> responding 
> > through minicom either.
> 
> Try poking around to see which irq your modem has.
> Use setserial to set the irq assigned to the port your modem is on,
> e.g. setserial -a /dev/ttyS1 irq 5 (that's a guess, I haven't 
> used it for
> years.)
> 
> Then run minicom and see if it talks to your modem.
> 
> If all else fails, you might have to use isapnptools. Good luck
> with them. I looked at them once and ran away screaming :)
> 
> Cheers,
> Rik
> 
> -- 
> 135. Displace the canon with attitude.
> 
> ************
> techtalk at linuxchix.org   http://www.linuxchix.org
> 

************
techtalk at linuxchix.org   http://www.linuxchix.org