[techtalk] Okay so I recompiled my kernel under RedHat 6.1

Tue Oct 26 23:08:14 EST 1999

	It's further confused by the fact that there's SCSI Support and then
there's SCSI "Emulation" Support.  Judging from your dmesg, you've got the
SCSI Support currently compiled in.  (I'm not sure if it's needed for this,
but I don't see how it can hurt to leave it in until someone else verifies
it's necessity or you've gotten the Zip drive to work and want to play ;^)

	Oh, and remember the zip drive is mounted as partition 4.  For example,
mine shows up as sdb at boot time.  To mount, in /etc/fstab I have:

	/dev/sdb4               /mnt/zip	vfat   noauto,defaults 0 0

	(the vfat is because I used to use these under windows 95/98)

Stephan

At 08:47 PM 10/26/99 -0700, you wrote:
>I thought I did that. I'll have to recompile again to make sure. There's so
>many settings that I guess I missed it.
>
>             Norma
>*Insert witty message here!*
>----- Original Message -----
>From: Stephan Zaniolo <eaglefeather at mindspring.com>
>To: <techtalk at linuxchix.org>
>Sent: Tuesday, October 26, 1999 7:34 PM
>Subject: Re: [techtalk] Okay so I recompiled my kernel under RedHat 6.1
>
>
>> I once heard that you need to activate SCSI emulation in the kernel (I
>> didn't see that in dmesg printout) to use the parallel port Zip drive.  (I
>> have a SCSI Zip drive, so I didn't have to deal with this).  Caitlyn, is
>> this is accurate or not?
>>
>> Good luck, :^)
>> Stephan
>>
>> At 03:41 PM 10/26/99 -0700, you wrote:
>> >> OK, you need to add the following line to your /etc/conf.modules file:
>> >>
>> >> alias block-major-8 ppa
>> >
>> >Okay for some reason this did not work. I have below listed the contents
>of
>> >my /etc/conf.modules file and also the bootup messages.
>> >
>> >alias sound es1370
>> >alias parport_lowlevel parport_pc
>> >alias block-major-8 ppa
>> >
>> >
>> >(after typing dmesg)
>> >
>> >Linux version 2.2.12-20 (root at porky.devel.redhat.com) (gcc version
>> >egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:25:54
>EDT
>> >1999
>> >Detected 233229442 Hz processor.
>> >Console: colour VGA+ 80x25
>> >Calibrating delay loop... 465.31 BogoMIPS
>> >Memory: 62780k/65536k available (1008k kernel code, 412k reserved, 992k
>> >data, 64k init)
>> >DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
>> >Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> >Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>> >VFS: Diskquotas version dquot_6.4.0 initialized
>> >CPU: Intel Pentium MMX stepping 03
>> >Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
>> >Checking 'hlt' instruction... OK.
>> >Intel Pentium with F0 0F bug - workaround enabled.
>> >POSIX conformance testing by UNIFIX
>> >PCI: PCI BIOS revision 2.10 entry at 0xfafb0
>> >PCI: Using configuration type 1
>> >PCI: Probing PCI hardware
>> >PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00)
>> >Activating ISA DMA hang workarounds.
>> >Linux NET4.0 for Linux 2.2
>> >Based upon Swansea University Computer Society NET3.039
>> >NET4: Unix domain sockets 1.0 for Linux NET4.0.
>> >NET4: Linux TCP/IP 1.0 for NET4.0
>> >IP Protocols: ICMP, UDP, TCP, IGMP
>> >TCP: Hash tables configured (ehash 65536 bhash 65536)
>> >Initializing RT netlink socket
>> >Starting kswapd v 1.5
>> >Detected PS/2 Mouse Port.
>> >Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
>> >ttyS00 at 0x03f8 (irq = 4) is a 16550A
>> >ttyS01 at 0x02f8 (irq = 3) is a 16550A
>> >ttyS02 at 0x03e8 (irq = 4) is a 16550A
>> >pty: 256 Unix98 ptys configured
>> >apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
>> >Real Time Clock Driver v1.09
>> >RAM disk driver initialized:  16 RAM disks of 4096K size
>> >VP_IDE: IDE controller on PCI bus 00 dev 39
>> >VP_IDE: not 100% native mode: will probe irqs later
>> >    ide0: BM-DMA at 0x6000-0x6007, BIOS settings: hda:pio, hdb:pio
>> >    ide1: BM-DMA at 0x6008-0x600f, BIOS settings: hdc:pio, hdd:pio
>> >hda: SAMSUNG SV0844A, ATA DISK drive
>> >hdb: ICD-3600AT, ATAPI CDROM drive
>> >hdc: CR-4802TE, ATAPI CDROM drive
>> >ide2: ports already in use, skipping probe
>> >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> >ide1 at 0x170-0x177,0x376 on irq 15
>> >hda: SAMSUNG SV0844A, 8063MB w/220kB Cache, CHS=1027/255/63
>> >hdb: ATAPI 24X CD-ROM drive, 120kB Cache
>> >Uniform CDROM driver Revision: 2.56
>> >hdc: ATAPI 8X CD-ROM CD-R/RW drive, 2048kB Cache
>> >Floppy drive(s): fd0 is 1.44M
>> >FDC 0 is an 8272A
>> >md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
>> >raid5: measuring checksumming speed
>> >raid5: MMX detected, trying high-speed MMX checksum routines
>> >   pII_mmx   :   329.946 MB/sec
>> >   p5_mmx    :   394.716 MB/sec
>> >   8regs     :   243.840 MB/sec
>> >   32regs    :   181.356 MB/sec
>> >using fastest function: p5_mmx (394.716 MB/sec)
>> >scsi : 0 hosts.
>> >scsi : detected total.
>> >md.c: sizeof(mdp_super_t) = 4096
>> >Partition check:
>> > hda: hda1 hda2 hda3 < hda5 hda6 >
>> >RAMDISK: Compressed image found at block 0
>> >autodetecting RAID arrays
>> >autorun ...
>> >... autorun DONE.
>> >VFS: Mounted root (ext2 filesystem).
>> >autodetecting RAID arrays
>> >autorun ...
>> >... autorun DONE.
>> >VFS: Mounted root (ext2 filesystem) readonly.
>> >change_root: old root has d_count=1
>> >Trying to unmount old root ... okay
>> >Freeing unused kernel memory: 64k freed
>> >Adding Swap: 64220k swap-space (priority -1)
>> >es1370: version v0.24 time 10:27:11 Sep 27 1999
>> >es1370: found adapter at io 0x6200 irq 11
>> >es1370: features: joystick off, line in, mic impedance 0
>> >VFS: Disk change detected on device ide0(3,64)
>> >VFS: Disk change detected on device ide1(22,0)
>> >parport0: PC-style at 0x378 [SPP,PS2]
>> >parport1: PC-style at 0x278 [SPP,ECP,ECPPS2]
>> >parport0: Printer, HEWLETT-PACKARD DESKJET 870C
>> >parport1: no IEEE-1284 device present.
>> >lp0: using parport0 (polling).
>> >lp1: using parport1 (polling).
>> >
>> >
>> >
>> >note: what's on my second parallel port ad a Microtek Scanmaker E3 Plus
>> >(which doesn't seem to work also). Thanks for the help :)
>> >
>> >             Norma
>> >*Insert witty message here!*
>> >
>> >
>> >
>> >************
>> >techtalk at linuxchix.org   http://www.linuxchix.org
>>
>>
>> ************
>> techtalk at linuxchix.org   http://www.linuxchix.org
>>
>>
>
>
>************
>techtalk at linuxchix.org   http://www.linuxchix.org


************
techtalk at linuxchix.org   http://www.linuxchix.org