[techtalk] Setting up my Mitsumi 4802TE CDRW under Redhat Linux 6.0

[Norma Armstrong]

I found out how to set it up. The next question I hope is a little easier.
If I have the line append="hdb=ide-scsi hdc=ide-scsi" only my cdreader is
able to get mounted. Mounting the writer will only show what's on the
reader. However if I leave out hdb then although the writer is recognized
the cdreader is nowhere to be found. How can I set it up so that both can be
seen by the system? I had hdb as /dev/sr0 and hdc as /dev/sr7 at first (when
the writer couldn't be accessed). Now I just have hdc as /dev/sr0 but again
hdb (my reader) is nowhere to be found. I can't access it under hdb either.
Where could it be, or how can I set it up so it will work properly. By the
way thanks for the reply :) Oh my kernel is 2.2.15.

                 Again thanks!
			Norma


> -----Original Message-----
> From: owner-techtalk at linuxchix.org
> [mailto:owner-techtalk at linuxchix.org]On Behalf Of Beverly Guillermo
> Sent: Friday, October 08, 1999 9:45 AM
> To: techtalk at linuxchix.org
> Subject: Re: [techtalk] Setting up my Mitsumi 4802TE CDRW under Redhat
> Linux 6.0
>
>
> Hopefully, I can help you out.  What version of the kernel are you using?
> Also,
> does the CDRW recognized as an IDE drive when you boot up?
>
> I'm at work right now, so I can't give you my settings.  I'll get to it as
> soon as I
> get home and mail you.
>
> Beverly
>

__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

************
techtalk at linuxchix.org   http://www.linuxchix.org