[Techtalk] Clueless Ripping Revisited--Hardware ?s

Beth Johnson linux.chick at verizon.net
Mon Oct 14 12:57:51 EST 2002


So, I've never gotten the ripping and encoding working on my system.

To recap, I have a Creative CD5233 emulated as scd0 and a TDK
CDRW241040B emulated as scd1.  This works fine for xcdroast and I've
been able to burn both data and audio cds.

When I try to rip with Grip nothing actually happens except for the
program stepping through the tracks.  There is no access of the cdrom
during the operation.  When I've tried using mp3c, it tells me that
paranoia can't open the device.  When I try MusicMatchJukebox, it
doesn't even see the device for play or record, even when I fix the
config to point to /dev/scd0.

When I go to the command line and try with cdparanoia, just using an
example they have in the help and adding -v :
-----------------
$ cdparanoia -Bv -- "-3"
cd paranoia III release 9.8 (March, 23 2001)
(c) 2001 Monty <monty at xiph.org> and Xiphophorus

Report bugs to paranoia at xiph.org
http://www.xiph.org/paranoia/

Checking /dev/cdrom for cdrom
        Testing /dev/cdrom for cooked ioctl() interface
                /dev/scd0 is not a cooked ioctl CDROM.
        Testing /dev/cdrom for SCSI interface
                No generic SCSI device found to match CDROM device
/dev/scd0
---------------

Hmm, perhaps I'm missing some modules here?
Here's the output from lsmod:

---------------
Module                  Size  Used by    Tainted: P  
smbfs                  39552   3 (autoclean)
sr_mod                 16920   0 (autoclean)
emu10k1                64096   3 (autoclean)
ac97_codec             12320   0 (autoclean) [emu10k1]
sound                  71692   0 (autoclean) [emu10k1]
soundcore               6500   7 (autoclean) [emu10k1 sound]
agpgart                39680   3 (autoclean)
NVdriver             1067552  10 (autoclean)
binfmt_misc             7460   1
appletalk              24172  12 (autoclean)
lp                      8672   0 (autoclean)
autofs                 11972   0 (autoclean) (unused)
tulip                  43232   1
ide-scsi                9664   0
ide-cd                 30272   0
cdrom                  32032   0 [sr_mod ide-cd]
nls_iso8859-1           3488   2 (autoclean)
nls_cp437               5120   2 (autoclean)
sd_mod                 12992   2 (autoclean)
vfat                   12092   2 (autoclean)
fat                    37240   0 (autoclean) [vfat]
parport_pc             17668   1 (autoclean)
parport                34208   1 [lp parport_pc]
usb-storage            58188   1
scsi_mod              109424   4 [sr_mod ide-scsi sd_mod usb-storage]
usb-uhci               24484   0 (unused)
usbcore                71904   1 [usb-storage usb-uhci]
ext3                   67328   3
jbd                    49528   3 [ext3]
-----------------

And my modules.conf:

-----------------
alias parport_lowlevel parport_pc
alias eth0 tulip
alias sound-slot-0 emu10k1
# Following for nVidia driver
alias char-major-195 NVdriver
# Following for ppa hostadapter for parallel port zip
alias scsi_hostadapter ppa
pre-install scsi_hostadapter insmod parport
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :
alias usb-controller usb-uhci
-----------------

Any insight?

TIA,
Beth
Palm questions next...
-- 
  /\/\    Beth Johnson
 / o o\   Cosmic Wonderer
( / ^^\)  Springfield, MA USA
 \ M_M/   "Ruling a country is like cooking a small fish--
           you have to handle it with care."--Lao Tzu
	




More information about the Techtalk mailing list