[techtalk] routing and firewall probem
James Peterson
jpeterson at romanmealmilling.com
Wed Aug 30 11:59:05 EST 2000
here is my problem.....
I have a VPN set up and working for the most part. But I have run in to
a problem and I am pretty sure its a masquarading and firewall problem.
here is what I have SiteA is the primary site and siteB is connection
or estabolishing a connection to SiteA.
Windows1--->SiteA <--> Interner<-->SiteB<---Windows2
I can ping and telnet from windows1 to SiteB though the IPTunnel
created by the software VTUN.
Windows1-->siteA.intIP-->SiteA.extIP-->internet-->SiteB.extip->SiteB.intIP-->windows2
and ViseVers from windows2 to Windows1. but on either side the farthest
any packet gets on the tunnel is to the intIP.
(ex windows1 ->SiteA.intip->Sitea.tunnel->Siteb.tunnel->SiteB.intip)
here is my route table
SiteA
tunnel.ip 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
int.network 0.0.0.0 255.255.255.0 U 0 0 0
eth1
remotenetwork Siteb.tunnelip 255.255.255.0 UG 0 0 0 tun0
ext.ip 0.0.0.0 255.255.255.0 U 0 0 0
eth0
gateway ISP.gateway 0.0.0.0 UG 1 0 0
eth0
SiteB
tunnel.ip 0.0.0.0 255.255.255.255 UH 0 0 0 tun1
int.network 0.0.0.0 255.255.255.0 U 0 0 0
eth1
remotenetwork SiteA.tunnelip 255.255.255.0 UG 0 0 0 tun1
ext.ip 0.0.0.0 255.255.255.0 U 0 0 0
eth0
gateway IPS.gateway 0.0.0.0 UG 1 0 0
eth0
I am masquareding both sides of the tunnel using IPchains.
ipchains -A forward int.network/24 -j MASQ
any help would be greatly appreciated
James Peterson
Roman Meal Milling Company
More information about the Techtalk
mailing list